24 Hours Lockout & Door Repair Service
Locked out ? Need your locks changed ?
Fully Insured, DBS Checked, At Your Service 24/7

Smart Guide to Install Smart Locks in Your Home


A smart lock is one of the amazing tools to keep your home safe and help you when you forget to lock your home and wondered whether you have locked the front door or not. A smart lock gets to connect to the mobile app easily same as spy cams so you can check easily either you have locked or unlocked the home from afar. So, why not install such smart locks at your home too?

If you have planned to install the smart locks at your homes for your ease here we have a guide for you, to install the smart locks on the door of your home. Have a look at the guide below!

Guide Below:-

Introducing a smart lock to your entrance entryway may appear to be an issue, however, it’s a genuinely straightforward establishment anybody can achieve.

1.Duct tape the Keyhole

To retrofit your entryway for brilliant lock use, you should eliminate one portion of your present deadbolt. At the point when you do that, the other half will presently don’t be firmly joined to the entryway. It needs to remain in a situation during the establishment interaction, however. Use a piece of tape to append the open-air side of your deadbolt the side with the keyhole to the entryway. Your shrewd lock may accompany tape gave particularly to this work. If not, painter’s tape should hold the piece set up without damaging the paint on your door.

2.Take Off the Thumb-latch

Remove the Thumb-hook Turn your thumb-hook with the goal that its screws are open. Unscrew tightens that hold the hook place. Eliminate them and set them in a protected spot. You will utilize them once more, so recall where you put them. If your deadbolt is bolted, open it. At that point, remove the thumb-lock from the door. On the off chance that there is a mounting plate, take it off too. Set these pieces out of the way.

3.Prepare the components

Most of the smart locks are with a variety of deadbolt models, they are with adjustable or interchangeable pieces. Fix up the components for compatibility with your particular deadbolt. This contains: Choosing the right mounting plate and selecting the right adapter. You need to make sure that which kind of deadbolt type you have? In case you don’t. Compare the deadbolt’s hardware to the latest one.

Pick a mounting plate arrangement that permits the mounting screws to sit straight when gotten setup; they ought not to point in or out. Pick the connector that slides over your deadbolt’s tailpiece.

4.Install the Plate and adapter

Fix the mounting plate on your door. The deadbolt’s tailpiece should slide through the center hole of the plate. Utilize the screws from your old deadbolt for holding the mounting plate in place properly. Fully tighten the screws.

After it, Slide the correct adapter onto the tailpiece. Once it is in place, finish tightening the screws. Stop turning the screwdriver as soon as the screws are snug; over-tightening can cause damage.

5. Spot the Lock and remove the tape

Slide the brilliant lock over the tailpiece adapter. Guarantee that the unit is sitting level against the entryway. Secure it to the mounting plate. It might cinch or clasp on. If you are experiencing difficulty with this progression, you may have to release the screws on the mounting plate. The strip of tape you have pasted on the outside of the door has done its job. Remove it and discard.

6.Provide power to the lock and configure it

Install the batteries to power up the lock. Because it runs with the batteries. In case, you come with the pre-installed batteries remove the plastic film that covers the battery terminals.

7.Configure the Lock


Open the application that you downloaded before establishment. Adhere to the guidelines to arrange your new lock. You will presumably be told to physically bolt and open your entryway a couple of times. When those means are done, you’ll have the option to have a go at locking and opening with only one hint of an in-application button.

For explicit setup tips, consistently counsel the proprietor’s manual for your image of a keen lock

Wrapping Up!

Smart locks are safest to use for the security of the home. Because everybody wants to protect their surroundings and belongings in the best of their efforts. These convenient devices are the simplest, yet even expensive. But they are the most suited ones for protecting the home in your absence.